How the EU GDPR will affect the use of Machine Learning - Part 1

On 5 December 2015, the European Parliament, the Council and the Commission reached agreement on the new data protection rules, establishing a modern and harmonised data protection framework across the EU. Then on 14th April 2016 the Regulations and Directives were adopted by the European Parliament.

The EU GDPR comes into effect on the 25th May, 2018.

Are you ready ?

The EU GDPR will affect every country around the World. As long as you capture and use/analyse data captured with the EU or by citizens in the EU then you have to comply with the EU GDPR.

Over the past few months we have seen a increase in the amount of blog posts, articles, presentations, conferences, seminars, etc being produced on how the EU GDPR will affect you. Basically if your company has not been working on implementing processes, procedures and ensuring they comply with the regulations then you a bit behind and a lot of work is ahead of you.

Like I said there was been a lot published and being talked about regarding the EU GDPR. Most of this is about the core aspects of the regulations on protecting and securing your data. But very little if anything is being discussed regarding the use of machine learning and customer profiling.

Do you use machine learning to profile, analyse and predict customers? Then the EU GDPRs affect you.

Article 22 of the EU GDPRs outlines some basic capabilities regarding machine learning, and in additionally Articles 13, 14, 19 and 21.

Over the coming weeks I will have the following blog posts. Each of these address a separate issue, within the EU GDPR, relating to the use of machine learning.

• Part 2 - Do I have permissions to use the data for data profiling?
• Part 3 - Ensuring there is no Discrimination in the Data and machine learning models.
• Part 4a - (Article 22: Profiling) Why me? and how Oracle 12c saves the day
• Part 4b - (Article 22: Profiling) Why me? and how Oracle 12c saves the day
• Part 5 - The right to be forgotten (EU GDPR)

Installing Scala and Apache Spark on a Mac

The following outlines the steps I've followed to get get Scala and Apache Spark installed on my Mac. This allows me to play with Apache Spark on my laptop (single node) before deploying my code to a multi-node cluster.

1. Install Homebrew

Homebrew seems to be the standard for installing anything on a Mac. To install Homebrew run

/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"

When prompted enter your system/OS password to allow the install to proceed.

2. Install xcode-select (if needed)

You may have xcode-select already installed. This tool allows you to install the languages using command line.

xcode-select --install

If it already installed then nothing will happen and you will get the following message.

xcode-select: error: command line tools are already installed, use "Software Update" to install updates

3. Install Scala

[If you haven't installed Java then you need to also do this.]

Use Homebrew to install scala.

brew install scala

4. Install Apache Spark

Now to install Apache Spark.

brew install apache-spark

5. Start Spark

Now you can start the Apache Spark shell.

spark-shell

6. Hello-World and Reading a file

The traditional Hello-World example.

scala> val helloWorld = "Hello-World"
helloWorld: String = Hello-World

or

scala> println("Hello World")
Hello World

What is my current working directory.

scala> val whereami = System.getProperty("user.dir")
whereami: String = /Users/brendan.tierney

Read and process a file.

scala> val lines = sc.textFile("docker_ora_db.txt")
lines: org.apache.spark.rdd.RDD[String] = docker_ora_db.txt MapPartitionsRDD[3] at textFile at :24

scala> lines.count()
res6: Long = 36

scala> lines.foreach(println)
####################################################################
## Specify the basic DB parameters
## Copyright(c) Oracle Corporation 1998,2016. All rights reserved.##
##                                                                ##
##------------------------------------------------------------------
##                   Docker OL7 db12c dat file                    ##

##                                                                ##
## db sid (name)
####################################################################
## default : ORCL

## cannot be longer than 8 characters
##------------------------------------------------------------------

...

There will be a lot more on how to use Spark and how to use Spark with Oracle (all their big data stuff) over the coming months.

[I've been busy for the past few months working on this stuff, EU GDPR issues relating to machine learning, and other things. I'll be sharing some what I've been working on and learning in blog posts over the coming weeks]

Slides from the Ireland OUG Meetup May 2017

Here are some of the slides from our meetup on 11th May 2017.

Ireland OUG Meetup May 2017 from Brendan Tierney

The remaining slides will be added when they are available.

OUG Ireland Meetup 11th May

The next OUG Ireland Meetup is happening on 11th May, in the Bank of Ireland Grand Canal Dock. This is a free event and is open to every one. You don't have to be a member to attend.

Following on from a very successful 2 day OUG Ireland Conference with over 250 attendees, we have organised our next meetup. This was mentioned during the opening session of the conference.

We typically have 2 presentations at each Meetup and on 11th May we have:

1. Oracle Analytics Cloud Service.

Oralce Analytics Cloud Service was only released a few weeks ago and we some local people who have been working with the beta and early adopter releases. They will be giving us some insights on this new product and how it compares with other analytics products like Oracle Data Visualization and OBIEE.

Running Oracle DataGuard on RAC on Oracle 12c

The second presentation will be on using Oracle DataGuard on RAC on Oracle 12c. We have a very experienced DBA talking about his experiences of using these products how to workaround some key bugs and situations to be aware of for administration purposes. Lots of valuable information to be gained.

Check out the full agenda and to register for the Meetup by clicking on this link or on the Meetup image above.

There will be some food and refreshments available for you to enjoy.

The Meetup will be in Bank of Ireland, Grand Canal Dock. This venue is a very popular locations for Meetups in Dublin.

Setting up Oracle Database on Docker

A couple of days ago it was announced that several Oracle images were available on the Docker Store.

This is by far the easiest Oracle Database install I have every done !

You simply have no excuse now for not installing and using an Oracle Database. Just go and do it now!

The following steps outlines what I did you get an Oracle 12.1c Database.

1. Download and Install Docker

There isn't much to say here. Just go to the Docker website, select the version docker for your OS, and just install it.

You will probably need to create an account with Docker.

After Docker is installed it will automatically start and and will be placed in your system tray etc so that it will automatically start each time you restart your laptop/PC.

2. Adjust the memory allocation

From the system tray open the Docker application. In the Advanced section allocate a bit more memory. This will just make things run a bit smoother. Be a bit careful on how much to allocate.

In the General section check the tick-box for automatically backing up Docker VMs. This is assuming you have back-ups setup, for example with Time Machine or something similar.

3. Download & Edit the Oracle Docker environment File

On the Oracle Database download Docker webpage, click on the the Get Content button.

You will have to enter some details like your name, company, job title and phone number, then click on the check-box, before clicking on the Get Content button. All of this is necessary for the Oracle License agreement.

The next screen lists the Docker Services and Partner Services that you have signed up for.

Click on the Setup button to go to the webpage that contains some of the setup instructions.

The first thing you need to do is to copy the sample Environment File. Create a new file on your laptop/desktop and paste the environment file contents into the file. There are a few edits you need to make to this file. The following is the edited/modified Environment file that I created and used. The changes are for DB_SID, DB_PASSWD and DB_DOMAIN.

####################################################################
## Copyright(c) Oracle Corporation 1998,2016. All rights reserved.##
##                                                                ##
##                   Docker OL7 db12c dat file                    ##
##                                                                ##
####################################################################

##------------------------------------------------------------------
## Specify the basic DB parameters
##------------------------------------------------------------------

## db sid (name)
## default : ORCL
## cannot be longer than 8 characters

DB_SID=ORCL

## db passwd
## default : Oracle

DB_PASSWD=oracle

## db domain
## default : localdomain

DB_DOMAIN=localdomain

## db bundle
## default : basic
## valid : basic / high / extreme
## (high and extreme are only available for enterprise edition)

DB_BUNDLE=basic

## end

I called this file 'docker_ora_db.txt'

4. Download and Configure Oracle Database for Docker

The following command will download and configure the docker image

$ docker run -d --env-file ./docker_ora_db.txt -p 1527:1521 -p 5507:5500 -it --name dockerDB121 --shm-size="8g" store/oracle/database-enterprise:12.1.0.2

This command will create a container called 'dockerDB121'. The 121 at the end indicate the version number of the Oracle Database. If you end up with a number of containers containing different versions of the Oracle Database then you need some way of distinguishing them.

Take note of the port mapping in the above command, as you will need this information later.

When you run this command, the docker image will be downloaded from the docker website, will be unzipped and the container setup and ready to run.

5. Log-in and Finish the configuration

Although the docker container has been setup, there is still a database configuration to complete. The following images shows that the new containers is there.

To complete the Database setup, you will need to log into the Docker container.

docker exec -it dockerDB121 /bin/bash

Then run the Oracle Database setup and startup script (as the root user).

/bin/bash /home/oracle/setup/dockerInit.sh

This script can take a few minutes to run. On my laptop it took about 2 minutes.

When this is finished the terminal session will open as this script goes into a look.

To run any other commands in the container you will need to open another terminal session and connect to the Docker container. So go open one now.

6. Log into the Database in Docker

In a new terminal window, connect to the Docker container and then switch to the oracle user.

su - oracle

Check that the Oracle Database processes are running (ps -ef) and then connect as SYSDBA.

sqlplus / as sysdba

Let's check out the Database.

SQL> select name,DB_UNIQUE_NAME from v$database;

NAME	  DB_UNIQUE_NAME
--------- ------------------------------
ORCL	  ORCL


SQL> SELECT v.name, v.open_mode, NVL(v.restricted, 'n/a') "RESTRICTED", d.status
     FROM v$pdbs v, dba_pdbs d
     WHERE v.guid = d.guid
     ORDER BY v.create_scn;


NAME			       OPEN_MODE  RES STATUS
------------------------------ ---------- --- ---------
PDB$SEED		       READ ONLY  NO  NORMAL
PDB1			       READ WRITE NO  NORMAL

And the tnsnames.ora file contains the following:

ORCL =   (DESCRIPTION = 
    (ADDRESS = (PROTOCOL = TCP)(HOST = 0.0.0.0)(PORT = 1521))
     (CONNECT_DATA = 
      (SERVER = DEDICATED)
       (SERVICE_NAME = ORCL.localdomain)     )   )

PDB1 =   (DESCRIPTION =
     (ADDRESS = (PROTOCOL = TCP)(HOST = 0.0.0.0)(PORT = 1521))
      (CONNECT_DATA =
       (SERVER = DEDICATED)
       (SERVICE_NAME = PDB1.localdomain)     )   )

You are now up an running with an Docker container running an Oracle 12.1 Databases.

7. Configure SQL Developer (on Client) to

access the Oracle Database on Docker

You can not use your client tools to connect to the Oracle Database in a Docker Container. Here is a connection setup in SQL Developer.

Remember that port number mapping I mentioned in step 4 above. See in this SQL Developer connection that the port number is 1527.

Thats it. How easy is that. You now have a fully configured Oracle 12.1c Enterprise Edition Database to play with, to have fun and to explore all the wonderful features of the Oracle Database.

ODM Model View Details Views in Oracle 12.2

A new feature for Oracle Data Mining in Oracle 12.2 is the new Model Details views.

In Oracle 11.2.0.3 and up to Oracle 12.1 you needed to use a range of PL/SQL functions (in DBMS_DATA_MINING package) to inspect the details of a data mining/machine learning model using SQL.

Check out these previous blog posts for some examples of how to use and extract model details in Oracle 12.1 and earlier versions of the database

Association Rules in ODM-Part 3

Extracting the rules from an ODM Decision Tree model

Cluster Details

Viewing Decision Tree Details

Instead of these functions there are now a lot of DB views available to inspect the details of a model. The following table summarises these various DB Views. Check out the DB views I've listed after the table, as these views might some some of the ones you might end up using most often.

I've now chance of remembering all of these and this table is a quick reference for me to find the DB views I need to use. The naming method used is very confusing but I'm sure in time I'll get the hang of them.

NOTE: For the DB Views I've listed in the following table, you will need to append the name of the ODM model to the view prefix that is listed in the table.

Data Mining Type	Algorithm & Model Details	12.2 DB View	Description
Association	Association Rules	DM$VR	generated rules for Association Rules
	Frequent Itemsets	DM$VI	describes the frequent itemsets
	Transaction Itemsets	DM$VT	describes the transactional itemsets view
	Transactional Rules	DM$VA	describes the transactional rule view and transactional itemsets
Classification	(General views for Classification models)	DM$VT DM$VC	describes the target distribution for Classification models describes the scoring cost matrix for Classification models
	Decision Tree	DM$VP DM$VI DM$VO DM$VM	describes the DT hierarchy & the split info for each level in DT describes the statistics associated with individual tree nodes Higher level node description describes the cost matrix used by the Decision Tree build
	Generalized Linear Model	DM$VD DM$VA	describes model info for Linear Regres & Logistic Regres describes row level info for Linear Regres & Logistic Regres
	Naive Bayes	DM$VP DM$VV	describes the priors of the targets for Naïve Bayes describes the conditional probabilities of Naïve Bayes model
	Support Vector Machine	DM$VL	describes the coefficients of a linear SVM algorithm
Regression ???	Doe	80	50
Clustering	(General views for Clustering models)	DM$VD DM$VA DM$VH DM$VR	Cluster model description Cluster attribute statistics Cluster historgram statistics Cluster Rule statistics
	k-Means	DM$VD DM$VA DM$VH DM$VR	k-Means model description k-Means attribute statistics k-Means historgram statistics k-Means Rule statistics
	O-Cluster	DM$VD DM$VA DM$VH DM$VR	O-Cluster model description O-Cluster attribute statistics O-Cluster historgram statistics O-Cluster Rule statistics
	Expectation Minimization	DM$VO DM$VB DM$VI DM$VF DM$VM DM$VP	describes the EM components the pairwise Kullback–Leibler divergence attribute ranking similar to that of Attribute Importance parameters of multi-valued Bernoulli distributions mean & variance parameters for attributes by Gaussian distribution the coefficients used by random projections to map nested columns to a lower dimensional space
Feature Extraction	Non-negative Matrix Factorization	DM$VE DM$VI	Encoding (H) of a NNMF model H inverse matrix for NNMF model
	Singular Value Decomposition	DM$VE DM$VV DM$VU	Associated PCA information for both classes of models describes the right-singular vectors of SVD model describes the left-singular vectors of a SVD model
	Explicit Semantic Analysis	DM$VA DM$VF	ESA attribute statistics ESA model features
Feature Section	Minimum Description Length	DM$VA	describes the Attribute Importance as well as the Attribute Importance rank

Normalizing and Error Handling views created by ODM Automatic Data Processing (ADP)

• DM$VN : Normalization and Missing Value Handling
• DM$VB : Binning

Global Model Views

• DM$VG : Model global statistics
• DM$VS : Computed model settings
• DM$VW :Alerts issued during model creation

Each one of these new DB views needs their own blog post to explain what informations is being explained in each. I'm sure over time I will get round to most of these.

Managing memory allocation for Oracle R Enterprise Embedded Execution

When working with Oracle R Enterprise and particularly when you are using the ORE functions that can spawn multiple R processes, on the DB Server, you need to be very aware of the amount of memory that will be consumed for each call of the ORE function.

ORE has two sets of parallel functions for running your user defined R scripts stored in the database, as part of the Embedded R Execution feature of ORE. The R functions are called ore.groupApply, ore.rowApply and ore.indexApply. When using SQL there are "rqGroupApply" and rqRowApply. (There is no SQL function equivalent of the R function ore.indexApply)

For each parallel R process that is spawned on the DB server a certain amount of memory (RAM) will be allocated to this R process. The default size of memory to be allocated can be found by using the following query.

select name, value from sys.rq_config;

NAME                                VALUE
----------------------------------- -----------------------------------
VERSION                             1.5
MIN_VSIZE                           32M
MAX_VSIZE                           4G
MIN_NSIZE                           2M
MAX_NSIZE                           20M

The memory allocation is broken out into the amount of memory allocated for Cells and NCells for each R process.

If your parallel ORE function create a large number of parallel R processes then you can see that the amount of overall memory consumed can be significant. I've seen a few customers who very quickly run out of memory on their DB servers. Now that is something you do not want to happen.

How can you prevent this from happening ?

There are a few things you need to keep in mind when using the parallel enabled ORE functions. The first one is, how many R processes will be spawned. For most cases this can be estimated or calculated to a high degree of accuracy. Secondly, how much memory will be used to process each of the R processes. Thirdly, how memory do you have available on the DB server. Fourthly, how many other people will be running parallel R processes at the same time?

Examining and answering each of these may look to be a relatively trivial task, but the complexity behind these can increase dramatically depending on the answer to the fourth point/question above.

To calculate the amount of memory used during the ORE user defined R script, you can use the R garbage function to calculate the memory usage at the start and at the end of the R script, and then return the calculated amount. Yes you need to add this extra code to your R script and then remove it when you have calculated the memory usage.

gc.start <- gc(reset=TRUE)
...
gc.end <- gc()
gc.used <- gc.end[,7] - gc.start[,7] # amount consumed by the processing

Using this information and the answers to the points/questions I listed above you can now look at calculating how much memory you need to allocated to the R processes. You can set this to be static for all R processes or you can use some code to allocate the amount of memory that is needed for each R process. But this starts to become messy. The following gives some examples (using R) of changing the R memory allocations in the Oracle Database. Similar commands can be issued using SQL.

> sys.rqconfigset('MIN_VSIZE', '10M') -- min heap 10MB, default 32MB
> sys.rqconfigset('MAX_VSIZE', '100M') -- max heap 100MB, default 4GB
> sys.rqconfigset('MIN_NSIZE', '500K') -- min number cons cells 500x1024, default 1M
> sys.rqconfigset('MAX_NSIZE', '2M') -- max number cons cells 2M, default 20M

Some guidelines - as with all guidelines you have to consider all the other requirements for the Database, and in reality you will have to try to find a balance between what is listed here and what is actually possible.

• Set parallel_degree_policy to MANUAL.
• Set parallel_min_servers to the number of parallel slave processes to be started when the database instances start, this avoids start up time for the R processes. This is not a problem for long running processes. But can save time with processes running for 10s seconds
• To avoid overloading the CPUs if the parallel_max_servers limit is reached, set the hidden parameter _parallel_statement_queuing to TRUE. Avoids overloading and lets processes wait.
• Set application tables and their indexes to DOP 1 to reinforce the ability of ORE to determine when to use parallelism.

Understanding the memory requirements for your ORE processes can be tricky business and can take some time to work out the right balance between what is needed by the spawned parallel R processes and everything else that is going on in the Database. There will be a lot of trial and error in working this out and it is always good to reach out for some help. If you have a similar scenario and need some help or guidance let me know.

OUG Ireland 2017 Presentation

Here are the slides from my presentation at OUG Ireland 2017. All about running R using SQL.

Embedded R Execution using SQL from Brendan Tierney

Presentations from OUGN17

Here are the presentations I gave at OUG Norway last week. These are also available on SlideShare

SQL: The one language to rule all your data from Brendan Tierney

Predictive analytics: Mining gold and creating valuable product from Brendan Tierney

Blog posts on Oracle Advanced Analytics features in 12.2

A couple of days ago Oracle finally provided us with an on-premises download for Oracle 12.2 Database.

Go and download load it from here

or

Download the Database App Development VM with 12.2 (This is what I did)

Over the past couple of months I've been using the DBaaS of 12.2, trying out some of the new Advanced Analytics option new features, and other new features. Here are the links to the blog posts on these new 12.2 new features. There will be more coming over the next few months.

New OAA features in Oracle 12.2 Database

Explicit Semantic Analysis in Oracle 12.2c Database

Explicit Semantic Analysis setup using SQL and PL/SQL

and slightly related is the new SQL Developer 4.2

Oracle Data Miner 4.2 New Features

Join the Oracle Scene Editorial Team

Are you a member of UKOUG?

How would you like to join the editorial team of Oracle Scene magazine as a deputy editor?

If you are interested we are looking to recruit 1 deputy editor to cover the Applications area and 2 deputy editors to cover the Tech area (DBA, Developer, BA, etc)

How much time is required? about 4 hours per edition, or maybe less.

What does a deputy editor do?

As part of the editorial team you will be expected to:

- Article Review

Articles submitted are uploaded to the review panel on Basecamp. During this time the editors should become familiar with the articles and have an idea of which ones would be appropriate for publication. Time approx 1.5hrs over a 2 week period.

- Editorial Call

After the review period has closed the editors come together for an editorial call (approx 1hr) to go through the feedback received on the articles, it is the editors job to validate any comments and select which articles should be chosen for publication. Time approx 1hr.

Some articles may need further rework by the authors and the editors provide comments & instructions as to the amends needed, in some cases the editors will take on the amends themselves or if they hold the relationship with the author they may wish to approach them direct. If any articles have been held over from the previous edition, the editors will relook at the articles and if any of the content needs to be updated they will advise. If we do not have articles submitted at this stage so the editors may need to source some additional content.

- Editorial Review

Once the selected articles are edited they are passed to the designer for layout, editors will then receive a first copy of the magazine where they will read the articles relevant to them (Apps or Tech) marking up on the pdf any errors in the text or images found. We try to build in time over a weekend for this with the comments due by 9am on the Monday. This is generally the last time the editors see the magazine, the next time being the digital version. Time approx 2hrs.

- Promotion

When the digital version is ready to be sent out – the editors & review panel are notified to help raise awareness of the magazine among their network.

- Article Sourcing

Call for articles is open all year as we will just hold those submitted in between the planning timeline over to the next edition. If there are particular topics that we feel would make good articles the editors are expected to help source potential authors and of course if they see good presentations again encourage those speakers to turn their presentation in to text.

- Flying the flag

Throughout the year the editors are expected to positively “fly the flag” of Oracle Scene, as a volunteer this will include, at the annual conference, taking part in the community networking to encourage future authors amongst the community.

If you are interested in a deputy editor role then submit your application now.

Check out UKOUG webpage for more details.

Slides from the OUG Ireland meet-ups

I've finally gotten the time (and the permissions from the presenters) to make the slides from the first two OUG Ireland meet-ups available.

I've posted them on SlideShare and I've embedded them in this blog post too.

OUG Ireland Meet-up 12th January - DevOps and Oracle Cloud from Brendan Tierney

20th Oct. 2016 OUG Ireland Meet-up - Updates from Oracle Open World 2016 from Brendan Tierney